#FLASHFXP 4.2.5 SOFTWARE#
#FLASHFXP 4.2.5 PC#

So all your devices need to start 192.168.0 or 192.168.1, you can't have both.Д¬hances are your router ip address will be either 192.168.1.1 or 192.168.0.1. If you want each device to talk each other, they need to be on the same network, i.e. The subnet is basically your network address. Think of this as a street name and the last number of the ip address is the house number. The circled areas are called the 'subnet'. If you are connecting it via a router, a 'standard', 'patch' or 'crossover' ethernet cable can be used. Remember if you've disabled your AU in the camd_cfg file, you'll need to enable it.ДЄ: There's a copy of FlashFXP here.Дigital Kaos - Downloads - FlashFXP v3.0.2 ()ДЄlso here's a wee note regarding ip addresses.Д¬ables - if you are connecting the dreambox direct to the PC, you need a 'crossover ethernet cable'.

#FLASHFXP 4.2.5 SOFTWARE#

Once this is done shut down the fxp software and reboot your box and or emu.Д¬ongrats you,ve just fixed your box and not spent a penny doing it. Remember to navigate to the folder you want the file to go in to first. Using the left mouse button, click and hold on the file you want to transfer then drag it over to the right side. The files on the left hand side are the files on your PC, the files on the right are the files on your dreambox. Now we need to navigate to var, look down that list of files in the right hand box till you see var, click on it, now you should see a list of new files, look down that list and you will see keys, click on that, again a new list of files will appear like this. Presto a list of files from your dreambox should appear in that right hand box that looks like the pic below, you are connect to your dream, good job!!. Right at this part you need your ip addy of your dream box, to find this go into the menu on your dreambox, scroll to setup then scroll down to expert setup,then communication setup, theres your dream box ip, write it down and go back to your flash fxp.Д®nter your ip into the server or url box. Once its opened you will see on the right hand box a sybol that looks like a thunder strike, click on that then quick connect and you will see a box like this.

Right to start we need to fire up flash fxp, it will look like this once you start it.

#FLASHFXP 4.2.5 PC#

pc goes to router,dreambox goes to router (note the ethernet lead port on the back of your dreambox.) This is based on my set up of pc/router/dreambox.

Now im presuming that some people might find the idea of flash fxp (ftp) a bit daunting if they have not used it before so heres a little help.

Right ive seen too many people thinking that they need to add a new image, nothing is further from the truth, you only need to add the new fix file to your old image.

Flashfxp 4.2.5